Boomba-racing Ford Fiesta ST Short Throw Shifter thanks to westc User Manual

FORD FIESTA ST SHORT THROW SHIFTER MATERIALS REQUIRED White lithium grease 1. Remove the center console rear bolts. 2. Remove the shift knob.3. Remov

5. Remove the right cover panel completely 6. Disconnect the power and the USB connectors.7. Remove the left cover panel completely. 8. Disconnect the

11. Remove the center console by pulling it back and up. 12. Disconnect the shifter cable links.13. Remove the shifter cables. Pull the spring-loaded

17. Remove the centering spring.18. Move the shifter arm forward and remove the spring clip.19. Remove the rubber grommet. 20. Pull the shifter pin ou

23. Remove the shifter level bumper.24. Factory component that will be used with the Boomba Racing short throw shifter.25. Install the shifter level b

29. Insert the Boomba Racing shifter arm into the shifter housing. Gently tap the shift pivot pin into position.30.Reinstall the centering spring and

35. Cut off the front corner of the reverse lock, around 3mm (1/8”) from the edge.36. Install the shifter cover. Reconnect the power and USB connector