WRX - FUEL RAILINSTALLATION MANUALMATERIALS REQUIRED8mm fuel hose 10 ft4mm vacuum hose 3 ft6mm vacuum hose 3 ft6mm vacuum connector5/16” hose clamps
19Remove throttle control connectors.20Remove the throttle control bracket.13Remove windshield washer tank’smounting screws. disconnect supply tube.Re
35Left “Green Bracket” removal (6 screws).Remove top two screws and unscrew thepower steering support clamp.3629Disconnect the main engine harnessconn
515245Right “Green Bracket” removal (4 screws).Remove top two screws.46Remove side bolt.47Disconnect back bolt.48Pull out the right bracket.4950Unplug
67Shorten the regulator’s output by about 1inch.68Bolt fuel pressure regulator to the top ofthe Boomba Distributor Block.61Remove fuel rails.6263Remov
83Install 4 mm vacuum hose between thefuel pressure regulator and the intakemanifold.8477Install the coolant overrun tank.78Bend the right engine grou
Comments to this Manuals